|
|
|
|
|
|
|
|
|
|
|
Posted: Sat Nov 14, 2009 10:19 pm
|
|
|
|
methuselah.alchemist I've been wanting to make Edward Elric's Dragon Lance for a while now, but I really have no idea what to use. I thought maybe this Crayola Model Magic stuff for the dragon, but I don't know what would be best to use to make a lance out of. Here's some ref. pics. There's a figure of him with it. I'm looking for better pics of it. There's one from Brotherhood, though I prefer the coloring from the first series. But I can paint it however, so that doesn't really matter I guess. Okay, having trouble finding pictures if it, so here's two of mine. >.> I don't know if this is the best way of doing this but you'll defiantly need a staff to start off with like a rod of wood, metal (curtain rod or shower rod) or a pvc pipe would work. You'll also need something to make the details on, remember what ever you use must be able to be supported by your staff and you'll have to carry it. You could use wood, craft foam(it's a little flimsy though you can reinforce it), scupley (it can break) and others if you want to know of more ideas if you don't like these or need more information you can ask for more or pm me. I hope I was a bit helpful sweatdrop
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Wed Jan 13, 2010 5:58 pm
|
|
|
|
Xx Crusnik05 xX So I need some advice on building a weapon. I'm wanting to go to Kamikaze con for down here in Texas. But first I need to see the limitation on weapons because these are the weapons I'm thinking of because at the moment I am undecided on wtf I'm going to cosplay as. And each option has a weapon and I want to make it. So maybe if I can get an idea of the difficulty...I could better decide -Squall Leonhart's gunblade -Sephiroth's Masamune -Marluxia's scythe Refs. Gunblade Masamune Marluxia's Scythe GOnna say the Masamune is probably the easiest of those weapons, though it really depends on what you're good at. I have made two of them myself: first second
Both of mine were made of bass wood, so they're nice and light. They are both scaled to the cosplayer who was carrying them, as con limitations will usually not allow you to have a full sized one anyhow smile
With the gunblade, I would consider making a papermache skeleton for it, and putting thermo plastic over it. Really, you could just do it entirely out of cardboard and papermache (paperclay or celluclay) but I think the plastic will help give it that metallic look better. Also, if you can make it hollow (or partially so) it will lighten it some.
For the scythe, PVC pipe, since it can be curved. Then either cardboard and papermache (the cheaper way) or wonderflex (more expencive) for the blade.
That's just how I would approach it though.. I have yet to make a gunblade or a scythe like that smile
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Jan 24, 2010 2:37 am
|
|
|
|
|
|
|
Posted: Sun Jan 24, 2010 7:09 am
|
|
|
|
|
|
|
|
|
Posted: Sun Jan 24, 2010 7:16 am
|
|
|
|
|
|
|
Posted: Sun Jan 24, 2010 10:33 am
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 26, 2010 12:02 am
|
|
|
|
Distorted_R e a l i t ii Alrighty, so! I'm looking to go to Fanime in a few months as Aoshi Shinomori from Rurouni Kenshin, and I actually got my hands on a fairly well done outfit. One problem! His double kodachi. Normally, I'd try to be lazy and buy one... yeah, not nearly that rich. Any suggestions as to making one?
This is what I mean, if you want to know. The bottom one is supposed to look like it's just a part of the sheath.
http://upload.wikimedia.org/wikipedia/en/6/6b/Aoshi-030.jpg Hmm. That is an interesting one. The only thing I can think of off hand, is making it like any other sword (wood or whatever your choice materials are, butcher some plastic swords, whatever) but the sheath would have to be thick enough to accommodate both blades.. and for ease of situating them, I would offset each blade a tad from the hilt.
To make the second blade look like it was just part of the sheath until you pulled it.. well, just make the sheath to your desired length and then cut off the end and use it as the hilt for the second sword. I don't have time to make an image at the moment, but please let me know if this makes any sense, because if it doesn't, I can whip up an image later smile
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Tue Jan 26, 2010 8:32 pm
|
|
|
|
Gennivieve Distorted_R e a l i t ii Alrighty, so! I'm looking to go to Fanime in a few months as Aoshi Shinomori from Rurouni Kenshin, and I actually got my hands on a fairly well done outfit. One problem! His double kodachi. Normally, I'd try to be lazy and buy one... yeah, not nearly that rich. Any suggestions as to making one?
This is what I mean, if you want to know. The bottom one is supposed to look like it's just a part of the sheath.
http://upload.wikimedia.org/wikipedia/en/6/6b/Aoshi-030.jpg Hmm. That is an interesting one. The only thing I can think of off hand, is making it like any other sword (wood or whatever your choice materials are, butcher some plastic swords, whatever) but the sheath would have to be thick enough to accommodate both blades.. and for ease of situating them, I would offset each blade a tad from the hilt. To make the second blade look like it was just part of the sheath until you pulled it.. well, just make the sheath to your desired length and then cut off the end and use it as the hilt for the second sword. I don't have time to make an image at the moment, but please let me know if this makes any sense, because if it doesn't, I can whip up an image later smile
Actually, very helpful! Thank you very much.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Thu Feb 04, 2010 4:27 am
|
|
|
|
|
|
|
Posted: Thu Feb 04, 2010 7:50 am
|
|
|
|
Xx Crusnik05 xX So I need some advice on building a weapon. I'm wanting to go to Kamikaze con for down here in Texas. But first I need to see the limitation on weapons because these are the weapons I'm thinking of because at the moment I am undecided on wtf I'm going to cosplay as. And each option has a weapon and I want to make it. So maybe if I can get an idea of the difficulty...I could better decide -Squall Leonhart's gunblade -Sephiroth's Masamune -Marluxia's scythe Refs. Gunblade Masamune Marluxia's Scythe
I'm also a Marluxia cosplayer. The best advice I could give you is make the handle out of PVC pipe. For the curve in the handle fill the pipe with hot water and bend it to you desired curve. For the blade carve it out of instilation foam and then paper mache it to make it stronger. Then obviously paint it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Posted: Sun Feb 14, 2010 4:06 pm
|
|
|
|
|
|
|
|
|
|
|